ExtremeWireless (Identifi)

Expand all | Collapse all

AP's with link problems

  • 1.  AP's with link problems

    Posted 07-25-2017 04:54
    In our dashboard I noticed that ther where AP's with link problems. However there are no problems. How can I clear this messages ?





  • 2.  RE: AP's with link problems

    Posted 07-25-2017 05:04
    Hi Johan,

    you'll get a "link problem" error if the port isn't running 1G so i.e. if you've the APs connected to a 100M only switch or if autosensing isn't working.

    -Ron


  • 3.  RE: AP's with link problems

    Posted 07-25-2017 05:04
    Hi Johan,

    What is the firmware version on the controller? Please check the below KB article,

    https://gtacknowledge.extremenetworks.com/articles/Solution/AP-s-are-listed-in-the-AP-s-with-uplink-...

    Regards,
    Nathiya M



  • 4.  RE: AP's with link problems

    Posted 07-25-2017 05:04
    firmware version is 10.31.03.001. AP's are connected to a 100 Mb port.


  • 5.  RE: AP's with link problems

    Posted 07-25-2017 05:04
    Ap's are connected to a 100 Mb port. Autosensing is working



  • 6.  RE: AP's with link problems

    Posted 07-25-2017 05:35
    OK then it's normal if the APs are connected via a 100Mb ports.

    I'm not aware of any way to clear that alarm.