ExtremeWireless (WiNG)

Expand all | Collapse all

Wing AP7532 POE consumption

  • 1.  Wing AP7532 POE consumption

    Posted 08-29-2018 08:14
    Hi,

    I wonder what is the watts consumption of AP7532? i cant find this info on instalation guide and ap data sheet.

    Regards
    Bart


  • 2.  RE: Wing AP7532 POE consumption

    Posted 08-29-2018 08:53
    Hello Bart,

    The operating current stated in the datasheet is 312mA at 48V DC so it sounds like a little below 15W. But it can be lower with idle state, low load etc.
    Hope that helps.

    Regards,
    Tomasz


  • 3.  RE: Wing AP7532 POE consumption

    Posted 08-29-2018 08:58

    OK thanks Tomasz,



  • 4.  RE: Wing AP7532 POE consumption

    Posted 08-29-2018 09:02
    Hello Bart,

    you can see selected PoE standad using show wireless ap detail
    VX# show wireless ap detail on AP


  • 5.  RE: Wing AP7532 POE consumption

    Posted 08-29-2018 14:11
    This off of the AP label itself:

    Input rating:

    12VDC - 1.25A so 15W
    48VDC - 0.375A (POE) so 18W



    Regards,

    Chris


  • 6.  RE: Wing AP7532 POE consumption

    Posted 08-30-2018 12:01
    Very informative, thanks all for input.


  • 7.  RE: Wing AP7532 POE consumption

    Posted 08-29-2018 09:02
    Note:

    Radio utilization, Tx power, amount of clients and RF noise around together with number of services running on AP | PD may change the consumption.

    You shall never drop PoE switch | PSE provisioning below .3af standard otherwise the AP | PD may not even boot up correctly.

    Regards,
    Ondrej