ExtremeWireless (WiNG)

Expand all | Collapse all

How to adopt standlone AP 7502 to wing controller vx9000

Niyas

Niyas08-05-2018 03:36

  • 1.  How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:19
    Hi,
    we have extreme AP 7502 and controller VX9000. we need to adopt AP 7502 to vx9000.we are working on the local/standalone platform.


  • 2.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:24
    Hi Niyas,

    Both devices if on the same vlan, AP7502 should be able adopt to VX9000 controller (VLAN adoption).

    Thank you


  • 3.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:36
    No,Different VLAN


  • 4.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 15:54
    VX9k requires a VX Platform license in order to adopt if you have not installed it, it will not adopt any APs. Please open a GTAC case as per Wei or call in.

    For the support toll-free number in your country: www.extremenetworks.com/support/contact


  • 5.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-06-2018 03:05
    Hi Robert,

    I have license key,but when i try to configure license key showing error-Feature name and license key mismatch.


  • 6.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-06-2018 05:40
    Niyas
    You have to be sure about your VX9000 applicance license. did you check your VX9000 Serial number ( sh version) ??


  • 7.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-06-2018 10:50
    1 - VX and AAP licenses should be valid on the controller
    2 - If applying the VX license using this command : #license VX and getting an error then the key might have been created when the VX had a different IP address. When the IP address on the VX controller is modified, the serial number changes and this disables all licenses. If this is the case, recreate the license/s using new serial number. Type VX in upper case when running the licensing command.
    3 - Make sure the AP can ICMP and Mint ping the controller and vice versa
    4 - Make sure ports 24576 and 24577 are not blocked

    If above are successful proceed with one of these adoption methods: https://gtacknowledge.extremenetworks.com/articles/Solution/CLI-command-for-layer-3-adoption-of-acce...


  • 8.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:24
    we are using different VLANs for AP and controller


  • 9.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:24
    Do AP able to reach controller? You may try on IP adoption.
    https://gtacknowledge.extremenetworks.com/articles/Solution/CLI-command-for-layer-3-adoption-of-acce...

    Make sure that your AP able to reach controller.


  • 10.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:24
    when i try to adopt ap7502 with Mint level 1 deployment - No cluster,but showing error-not adopted to any wireless controller


  • 11.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:24
    Can you try command below in controller and AP and confirm from the logs if they had attempt to adopt?
    show adoption history
    show mint mlcp history

    And did your controller able to ping on AP?


  • 12.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:24
    Hi Wei,

    please find the Adoption history of controller

    -------------------------------------------------------------------------------- --------------------
    MAC TYPE EVENT TIME-STAMP REASON
    -------------------------------------------------------------------------------- --------------------
    74-67-F7-C1-DD-0A ap7502 un-adopted 2018-08-05 14:33:53 VX lice nse is not installed, controller cannot adopt
    74-67-F7-C1-DD-0A ap7502 un-adopted 2018-08-05 14:33:23 VX lice nse is not installed, controller cannot adopt
    74-67-F7-C1-DD-0A ap7502 un-adopted 2018-08-05 14:32:53 VX lice nse is not installed, controller cannot adopt
    74-67-F7-C1-DD-0A ap7502 un-adopted 2018-08-05 14:32:23 VX lice nse is not installed, controller cannot adopt
    74-67-F7-C1-DD-0A ap7502 un-adopted 2018-08-05 14:31:53 VX lice nse is not installed, controller cannot adopt
    74-67-F7-C1-DD-0A ap7502 un-adopted 2018-08-05 14:31:23 VX lice nse is not installed, controller cannot adopt
    74-67-F7-C1-DD-0A ap7502 un-adopted 2018-08-05 14:30:52 VX lice nse is not installed, controller cannot adopt
    74-67-F7-C1-DD-0A ap7502 un-adopted 2018-08-05 14:30:22 VX lice nse is not installed, controller cannot adopt
    74-67-F7-C1-DD-0A ap7502 un-adopted 2018-08-05 14:29:52 VX lice (Enter:next line Space:next page Q:quit R:show the rest)



  • 13.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:24
    Hi, it shows that your license are not installed in your controller. You will need to purchase license in order to adopt it. Meanwhile, you can send request for demo license while waiting for your permanent license to arrive.

    Can you provide output of command below from your controller and send it to support@extremenetworks.com with [wing] on your email subject title, to get demo license
    show license
    show version

    Thank you


  • 14.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:24
    we already have voucher ID,but when try to activate through extreme portal showing error.



  • 15.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:24
    Can you send the error screenshot and your voucher ID to support@extremenetworks.com" target="_blank" rel="nofollow noreferrer noopener">support@extremenetworks.com with [wing] on your email subject title.
    We will have GTAC person to fix on your on your voucher ID.


  • 16.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:24
    i have one doubt,we are using controller and AP 7502 locally,please share simple way to adopt AP 7502 to controller


  • 17.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-05-2018 03:24
    Hi Niyas,

    The simplest way for your deployment( different vlan for VX9000 and AP7502) will be using controller host and point the AP to VX9000 IP(make sure they are reachable by ping)


  • 18.  RE: How to adopt standlone AP 7502 to wing controller vx9000

    Posted 08-06-2018 03:05
    Please call GTAC, we will help you resolve this. Have your voucher# and output of the CLI command 'show ver' from the VX9000 when you call in.