ExtremeWireless (WiNG)

Hello community,

I want debug mint but when I running : logging monitor debugging in addition I see all event-history and it's very annoying because I have a huge amout of wireless clients.
Any way to see in ssh the only relevant info when runnung debug ?

Thanks,

Aviv

Hi Aviv,

What we can try is disable logging console, this will reduce the console level messages when you run show logging.

#self
#no logging console

Regards,
JD

Hello Jian Dong Chong,

I still receiving all DOT11 messages, huge amount of them.

Regards,

Aviv

Hi Aviv,

Can you share with me the output of below,

#show logging
Logging module: enabled
Aggregation time: disabled
Console logging: disabled
Monitor logging: disabled
Buffered logging: disabled
Syslog logging: level warnings
Facility: local7

#show debugging

Regards,
JD

Hello Jian Dong Chong,

VC#show debugging
Mint:
ping debug is on
routing debug is on
spf debug is on
traceroute debug is on
staticarp debug is on
dpimetadata debug is on

VC#show logging

Logging module: enabled
Aggregation time: 60 seconds
Console logging: level warnings
Monitor logging: level debugging
Buffered logging: level warnings
Syslog logging: level warnings
Facility: local7

Log Buffer (48027 bytes):

....%DOT11-6-WPA_WPA2_SUCCESS:....
....mint_routing.c:6538 flood_csnp_now....
....%DOT11-6-WPA_WPA2_SUCCESS:....
....%DOT11-6-CLIENT_ASSOCIATED:....
....%DOT11-6-CLIENT_INFO:....
....%DOT11-6-WPA_WPA2_SUCCESS:....
....%DOT11-6-CLIENT_ASSOCIATED:....
.....mint_routing.c:6308 flood_csnp....
....%DOT11-6-CLIENT_INFO:....
....mint_routing.c:4675 check_dataplane_hello....
....%DOT11-6-WPA_WPA2_SUCCESS:....
....%DOT11-6-CLIENT_ASSOCIATED:....
....%DOT11-6-CLIENT_INFO:....

bla bla bla

very annoying all these DOT11 messages...

Can I filter them out ?

Regards,

Aviv

Hi Aviv,

Is this a Virtual Controller deployment environment ?

Can check DOT11 messages is coming from which AP ?

And on that AP, check Buffered logging is level warnings or others level.

Regards,
JD

Hello JD,

It's a vc deployment.

I know from wich AP messages are coming and it's OK.
Buffered logging is on level warnings.

Regards,

Aviv

Hello,
Not received any solving suggestions about it.Help please
Thanks,
Aviv

Hi Aviv,
If you're not getting the answers you're expecting from the community, please open a case with GTAC.

Hello Drew,
Thanks