ExtremeWireless (WiNG)

Hi.

I have a vx9000 + nsight installed. I have configured several rf-domains in the tree structure and added the plans. In the nsight I see the planes correctly in the maps view tab but the aps do not appear to be able to place them. I'm forgetting something?

Thanks

hi jose

did you define the APs on the floorplan on the controllers. This is a manual process

[/code]
I am in that step but the aps do not appear to be able to move them directly to the floorplan[/code]

The APs are locked on the Controller under Dashboard/Network View. There is an unlock/lock ICON on the far right-hand side to unlock/lock APs. Once done, commit/save. Same will need to be done on NSight.

At the end i had to put the APs inside each rf-domain from the network view in the wing so that they would appear in the nsight and be able to drag them to their location.
Thanks Chistopher and thanks Andy.
Regards

hi,

i have a similar situation. On the same Rf domain only some APs doesn't show up to be able to drag them to the map.

Regards,

do you have any suggestions?
Thank you!