ExtremeWireless (WiNG)

One of Multi Speciality hospital, here using AP 7522E. Now Customer asking Support for RFID. Is this device support for RFID. If it possible how to configure. any documentation is there?. Or else Shall we go for any other third party software?

Hi Saravanamurthy,

we do not support RFID explicitly on WiNG.
You may turn to some 3rd party solution supported on WiNG, like AeroScout or Ekahau.

For more details I'd strongly recommend you to contact local sales representative or business partner of yours.

Regards,
Ondrej

Any other have document for configure the wing AP to AeroScout/Ekahau?

Aeroscout/Ekahu is only supported on enterprise AP - not expess.

Any Configuration document is available

I do not think that we have the specific document for this topic.

But, you could check one configuration guide on 15.4.14

https://documentation.extremenetworks.com/WiNG/5.9.1/9035204_WiNG_5_9_1_WC_SRG.pdf?_ga=2.134905785.9...

Best regards,

Hi,

Bin is correct, just pointing to wrong part of User guide.
See 8.7.5 Access Point Radio Configuration - Advanced Settings

In CLI you can do this using below commands
VX(config)#profile ap7532 default-ap7532 VX(config-profile-default-ap7532)#interface radio x VX(config-profile-default-ap7532-if-radio2)#aeroscout mac