ExtremeWireless (WiNG)

  • 1.  RFID Tag Reading

    Posted 03-20-2018 05:46
    One of Multi Speciality hospital, here using AP 7522E. Now Customer asking Support for RFID. Is this device support for RFID. If it possible how to configure. any documentation is there?. Or else Shall we go for any other third party software?



  • 2.  RE: RFID Tag Reading

    Posted 03-20-2018 07:16
    Hi Saravanamurthy,

    we do not support RFID explicitly on WiNG.
    You may turn to some 3rd party solution supported on WiNG, like AeroScout or Ekahau.

    For more details I'd strongly recommend you to contact local sales representative or business partner of yours.

    Regards,
    Ondrej


  • 3.  RE: RFID Tag Reading

    Posted 03-20-2018 16:42
    Any other have document for configure the wing AP to AeroScout/Ekahau?


  • 4.  RE: RFID Tag Reading

    Posted 03-21-2018 06:34
    Aeroscout/Ekahu is only supported on enterprise AP - not expess.


  • 5.  RE: RFID Tag Reading

    Posted 03-22-2018 06:35
    Any Configuration document is available


  • 6.  RE: RFID Tag Reading

    Posted 03-28-2018 06:31
    I do not think that we have the specific document for this topic.

    But, you could check one configuration guide on 15.4.14

    https://documentation.extremenetworks.com/WiNG/5.9.1/9035204_WiNG_5_9_1_WC_SRG.pdf?_ga=2.134905785.9...

    Best regards,


  • 7.  RE: RFID Tag Reading

    Posted 03-28-2018 06:31
    Hi,

    Bin is correct, just pointing to wrong part of User guide.
    See 8.7.5 Access Point Radio Configuration - Advanced Settings

    In CLI you can do this using below commands
    VX(config)#profile ap7532 default-ap7532 VX(config-profile-default-ap7532)#interface radio x VX(config-profile-default-ap7532-if-radio2)#aeroscout mac