ExtremeWireless (WiNG)

RFS4000 doesn´t see another wing neighbors

  • 1.  RFS4000 doesn´t see another wing neighbors

    Posted 11-29-2018 10:36
    Hello,
    I have 6 RFS4010 with wing 5.4 distributed in two buildings.
    4 RFS4010 are in one building and 2 RFS4010 are in the other building.
    The link between buildings is a Wireless link.
    I found that some RFS4010 had wing 5.4.0.0-047 and others has 5.4.2.0-030, so I decided to upgrade all to 5.4.2.0.030R.
    After the upgrade, I have 2 RFS4010 which they are not adopting any AP650.
    In the CLI I run this command and I get this:
    rfs4000-6F908C#show mint neighbors
    0 mint neighbors of 19.6F.90.8C:

    This particular RFS4010 was not upgraded because it was with wing 5.4.2.0, so I can not understand why is not working the wing protocol on this device

    Any idea?

    Regards,