ExtremeWireless (WiNG)

Expand all | Collapse all

Captive Portal Options in WiNG 5.9.1

  • 1.  Captive Portal Options in WiNG 5.9.1

    Posted 11-14-2017 06:50
    In RFS 4000 OS Version is WiNG 5.9.1. Actually i want use captive portal. I seen Captive Portal Type 1. No Authentication Required. 2. Radius Authentication. 3. Registration. 4. Email Access. 5. Mobile Access. 6. Other Access. In these Six, which are used with out NAC Software? Explain.


  • 2.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 11-14-2017 07:02
    Hi,

    you can use all without NAC.

    Description you already write.

    1. No authentication just a page to maybe accept T&C
    2. Classical captive portal with RADIUS authentication (internal AAA is possible)

    The other I normally don't use. Is more for self registration.


  • 3.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 11-14-2017 07:41
    Thanks. I need other options also...


  • 4.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 11-16-2017 04:03
    Hi, pls any one give me the solutions for above one



  • 5.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 11-16-2017 15:01
    Hi Sravanamurthy,

    What other options are you looking for?

    All captive portal options that require username/password login can be used with accounts local to the controller (by configuring the controller to act as a RADIUS server). A separate NAC device is not required.


  • 6.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 11-16-2017 15:19
    Hi Brandon,

    How to configure Guest user will log from Captive Portal by OTP/Coupon generation automatically


  • 7.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 11-16-2017 15:44
    The following WiNG 5.x Captive Portal guide goes through this process, including creating temporary guest accounts:
    http://documentation.extremenetworks.com/ExtremeWireless/WING_5X_CAPTIVE_PORTALS_HTG_TME-12-2012-01_...

    Edit: Anilash has linked a new, better document below.


  • 8.  RE: Captive Portal Options in WiNG 5.9.1



  • 9.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 11-22-2017 04:39
    Hi,

    My problem is Guest access the ssid, that time mail will send to the authenticate person, after that person approve the access through mail to the guest.

    What are the requirements need to solve this problem?


  • 10.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 11-16-2017 04:03
    I've updated this topic's title to help others understand what you're looking for.


  • 11.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 11-16-2017 04:03
    Hi Drew,

    How to Configure Guest user will log from Captive Portal by OTP/Coupon generation automatically


  • 12.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 11-16-2017 19:05
    Thanks, Anilash. I didn't realize we had an updated version of that guide.


  • 13.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 03-29-2019 07:47
    Is there any special configuration to work with AP VC configuration (Advanced GUI interface)?

    RGRDs
    Michal


  • 14.  RE: Captive Portal Options in WiNG 5.9.1

    Posted 04-02-2019 20:34
    Hi Saravanamurthy,

    If you are looking for a sponsored authentication (guest reaches SSID, puts his e-mail, then a message goes to a 'sponsor' and that person approves the guest), on WiNG it can be run with ExtremeGuest solution or with Extreme Access Control.

    Hope that helps,
    Tomasz