ExtremeWireless (WiNG)

  • 1.  OIDs for RF Quality Index

    Posted 04-14-2018 13:59
    Hello -

    I'd like to track the RF Quality Index of my entire WiNG (VX9000) system and the same index per each RF Domain. Is there an OID in the WiNG MIBs for this?

    Thanks!


  • 2.  RE: OIDs for RF Quality Index

    Posted 04-14-2018 18:41
    I found these:

    -- 1.3.6.1.4.1.388.50.1.4.3.2.6.1.1.19
    wingStatsRfdWlClientStatDetailQIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "RF quality Index

    Measure the quality of the medium in percentage. It is a function of average retries and error rate. Its range is from 0-100. Typically:
    -1: no data available ( e.g. radio is not in wlan operation mode )
    0-20: very poor quality
    20-40: poor quality
    40-60: average quality
    60-100: good quality

    XPath: /wing-stats/rf_domain[name=key1]/wireless/client-stats-details[mac=key2]/q_index"
    ::= { wingStatsRfdWlClientStatDetailEntry 19 }

    -- 1.3.6.1.4.1.388.50.1.4.3.2.5.1.1.20
    wingStatsRfdWlClientStatQIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "RF quality Index

    Measure the quality of the medium in percentage. It is a function of average retries and error rate. Its range is from 0-100. Typically:
    -1: no data available ( e.g. radio is not in wlan operation mode )
    0-20: very poor quality
    20-40: poor quality
    40-60: average quality
    60-100: good quality

    XPath: /wing-stats/rf_domain[name=key1]/wireless/client-stats[mac=key2]/q_index"
    ::= { wingStatsRfdWlClientStatEntry 20 }

    -- 1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.21
    wingStatsDevWlRadioStatQIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "RF quality Index

    Measure the quality of the medium in percentage. It is a function of average retries and error rate. Its range is from 0-100. Typically:

    -1: no data available ( e.g. radio is not in wlan operation mode )
    0-20: very poor quality
    20-40: poor quality
    40-60: average quality
    60-100: good quality

    XPath: /wing-stats/device[mac=key1]/wireless/radio-stats[radio_id=key2]/q_index"
    ::= { wingStatsDevWlRadioStatEntry 21 }

    -- 1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.21
    wingStatsRfdWlRadioStatQIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "RF quality Index

    Measure the quality of the medium in percentage. It is a function of average retries and error rate. Its range is from 0-100. Typically:
    -1: no data available ( e.g. radio is not in wlan operation mode )
    0-20: very poor quality
    20-40: poor quality
    40-60: average quality
    60-100: good quality

    XPath: /wing-stats/rf_domain[name=key1]/wireless/radio-stats[radio_id=key2]/q_index"
    ::= { wingStatsRfdWlRadioStatEntry 21 }



  • 3.  RE: OIDs for RF Quality Index

    Posted 04-14-2018 19:12
    Thank you.

    That brought back an index per client. But what I'm really looking to keep track of (for history/trending purposes) is the over RF Quality Index of either the entire system or on a per RF Domain basis....much like below. A single digit score per RF Domain.



    Thanks!


  • 4.  RE: OIDs for RF Quality Index

    Posted 04-15-2018 13:07
    I would recommend testing NSight, it is what the NSight was designed for.

    https://documentation.extremenetworks.com/WiNG/5.9.0/9035124_NSight_5_9_UG.pdf