ExtremeWireless (WiNG)

  • 1.  DVC with internal RADIUS

    Posted 10-27-2021 03:17
    Hello!

    APs - AP310i with VC with internal RADIUS.
    Redundancy working fine - after failure control is normally transferred to the backup controller.
    But after re-election of the controller, the RADIUS server policy activation checkbox is reset (Activate RADIUS Server Policy).
    As a consequence, there is a problem with authentication using 802.1x
    After checking the checkbox and saving the config, everything works again.

    Any ideas how to resolve this issue?

    Thank you!


  • 2.  RE: DVC with internal RADIUS

    Posted 10-28-2021 11:15
    Hi,
    I would suggest that you check the "Radius Server Policy" is applied on the AP310i System Profile and not the VC AP directly which will make it a device config limited only to that AP.

    Regards,
    Ovais