ExtremeWireless (WiNG)

Expand all | Collapse all

AP 6532 Led Indicators

  • 1.  AP 6532 Led Indicators

    Posted 12-04-2017 14:28
    Hi, I have 2 6532 APps that were working without a problem, now they are not responding, i reboot them and they doesn't come up, the LED Indicators are Solid Green and never change this State.

    ¿What can i do?, they dont have an console port.



  • 2.  RE: AP 6532 Led Indicators

    Posted 12-04-2017 14:41
    Hi Leonardo

    This status indicates that the equipment is in the process of system booting
    Did you try updating the Firmware?
    Do you have controller?



  • 3.  RE: AP 6532 Led Indicators

    Posted 12-04-2017 14:52
    Hi Edmundo, thanks for your response.

    The leds are always on, they never change,

    Its Strange because it was working, and suddenly 2 AP stoped respoding ping and then a third, when rebooted the Leds dont change.

    I have 4 AP 6532 and one of them is the virtual controller of all of them, at first i thought it was an Hardware issue, now i think it could be and problem with the virtual controller.

    I dont have a lot of experience with this AP with a virtual controller among them.



  • 4.  RE: AP 6532 Led Indicators

    Posted 12-04-2017 15:00
    you can see the AP with apdiscover tool?


  • 5.  RE: AP 6532 Led Indicators

    Posted 12-04-2017 15:05
    Hello Leonardo,

    See an article here:

    What does LED blinking means on AP650?

    As per the description you might be experiencing bootup or memory corruption issues.
    Please consider raising a support case or RMA to get your APs replaced.

    Regards,
    Ondrej


  • 6.  RE: AP 6532 Led Indicators

    Posted 12-04-2017 15:16
    You can enter via CLI to the Virtual Controller and send the following information:

    show boot

    show adoption history

    show adoption status




  • 7.  RE: AP 6532 Led Indicators

    Posted 12-04-2017 15:05
    Hello Leonardo,

    Here is one article about how to submit an RMA case.

    Submit an RMA Case on the Extreme Portal
    https://gtacknowledge.extremenetworks.com/articles/How_To/Submit-RMA-via-New-Support-Portal

    Regards,
    Bin