ExtremeWireless (WiNG)

Expand all | Collapse all

I can't reset the AP

  • 1.  I can't reset the AP

    Posted 07-31-2018 14:02
    Hi,

    I am using AP 7522. This Firmware is 5.9.2.1, if i do factory default only reset for IP. not reset for configuration. even login password also not reseted.

    above firmware used two AP's. one is VC another one is AP. but Ap is not adopted VC. both are connected same switch. i checked show mint neighbors command. its showing 0 mint.

    pls tell me where i did mistake.


  • 2.  RE: I can't reset the AP

    Posted 07-31-2018 14:05
    What method are you using to reset the AP?


  • 3.  RE: I can't reset the AP

    Posted 07-31-2018 14:07
    please confirm that you have not enabled a multicast filter on the switch, this is block mint discover

    to rest the ap

    en
    delete startup-config
    com w
    reload



  • 4.  RE: I can't reset the AP

    Posted 07-31-2018 14:11
    Hello, If password still not affected this eventually means that AP is perfectly adopted by VC or some other controller. Misha


  • 5.  RE: I can't reset the AP

    Posted 07-31-2018 15:10
    Check if AP is getting adopted with CLI command:

    'show adoption status'



  • 6.  RE: I can't reset the AP

    Posted 07-31-2018 15:20
    login name as reset & password as FactoryDefault


  • 7.  RE: I can't reset the AP

    Posted 08-01-2018 06:47
    login : reset
    pwd: FactoryDefault

    show adioption status
    show mint neighbors
    show mint links



  • 8.  RE: I can't reset the AP

    Posted 08-01-2018 06:53
    please your mint policy too, may be the mint configuration is disabled on VLAN or IP.

    self
    no mint mlcp vlan
    no mint mlcp IP

    check your firewall rules on your switch.



  • 9.  RE: I can't reset the AP

    Posted 08-01-2018 09:27
    Thank u guys