ExtremeWireless (WiNG)

Expand all | Collapse all

How to switch off LED of a single AP 7522 permanently ?

  • 1.  How to switch off LED of a single AP 7522 permanently ?

    Posted 11-04-2017 05:50
    I have s small private customer solution with 5x AP7522, without central Controller.
    one of the AP´s is the virtual Controller.

    customer demands that we switch of the LED´s on the AP´s permanently, he don´t want to have

    any blinking or flashing.

    As per CLI Reference there is a command .. #NO LED for Profiles.

    I tried to select the AP via CLI and his mac address and set this command .. "no success"

    I tried to select the builtin AP 7522 Profile and set this command "no success"

    i made a "commit" and reload .. "no success"

    where is my fault ?

    I can not imagine, that is not possible on such a professional AP to Switch off the LED´s ...

    Regards

    Chris



  • 2.  RE: How to switch off LED of a single AP 7522 permanently ?

    Posted 11-04-2017 11:12
    Chris,

    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-physically-locate-an-AP-using-the-L...

    can you review that article

    also have you test if you login on the AP to use the NO LED command.

    Bastian
    -



  • 3.  RE: How to switch off LED of a single AP 7522 permanently ?

    Posted 11-04-2017 11:16
    Hello , turn off Is possible, but you should not apply over the profile, you should apply over config ap7522 Mac Device.


  • 4.  RE: How to switch off LED of a single AP 7522 permanently ?

    Posted 11-04-2017 12:14
    The correct format for the command to disable LED via the CLI is:

    If you want to disable LED on ALL APs, you need to know the name of the profile applied to the APs, default-ap7522 would be it unless you made changes:
    conf profile ap7522 name-of-your-profile
    no led
    commit write[/code]
    If you want to disable LED on a single AP:
    conf ap7522 mac-address-of-AP
    no led
    commit write[/code]
    You might need to remove overrides if you've introduced local AP configs and the profile isn't working as expected:
    conf ap7522 mac-address-of-AP
    remove-override led
    commit write[/code]


  • 5.  RE: How to switch off LED of a single AP 7522 permanently ?

    Posted 11-06-2017 00:41
    If you prefer to use the GUI but are running the enterprise UI follow the below:

    configuration --> system profile --> advanced --> miscellaneous -->LEDs --> select 'off'



  • 6.  RE: How to switch off LED of a single AP 7522 permanently ?

    Posted 11-06-2017 00:41