ExtremeWireless (WiNG)

Expand all | Collapse all

Network View Wing 5.8.5

  • 1.  Network View Wing 5.8.5

    Posted 06-29-2017 06:40
    looking at the the network view in wing 5.8.5 I can see the AP's OK, but some are RED with a red ring round them
    I have looked on the help, but it does not give any information, does anyone have an idea why some are red ?



  • 2.  RE: Network View Wing 5.8.5

    Posted 06-29-2017 06:49
    Hello Phil,

    this usually means those have a crash file on them.




    Once you delete this (and commit & write to apply changes), it will look normal.

    Regards,
    Ondrej



  • 3.  RE: Network View Wing 5.8.5

    Posted 06-29-2017 07:30
    Hi Ondrej
    many thanks for that, spot on, I'll keep an eye on those devices to see if crash files come back, But I think it may have been the power outage that we had


  • 4.  RE: Network View Wing 5.8.5

    Posted 07-22-2017 01:03
    Dear @Ondrej Lepa

    I have more crash file. How to delete all them quickly? Why is there so much crash files

    Thanks


  • 5.  RE: Network View Wing 5.8.5

    Posted 07-24-2017 12:51
    Hi Tuan
    I think you have to go to each device, if you go to Devices / operations and then select the device from the lefthand view then in the middle view



    the crash file will appear under filename, highlight it and select delete at the bottom, Some on the crash files I had were from 2016, so filed them in B1N


  • 6.  RE: Network View Wing 5.8.5

    Posted 07-25-2017 19:39
    The steps outlined by Ondrej, using the CLI from the wireless controller, is the best and quickest method to remove all crash files from all devices within the rf-domain. If multiple rf-domains are configured, the remote-debug command would need to be issued for each rf-domain.


  • 7.  RE: Network View Wing 5.8.5

    Posted 07-25-2018 18:33
    Perfecto me funciono por lineas de comando mas rapido


  • 8.  RE: Network View Wing 5.8.5

    Posted 07-22-2017 01:03
    Hi Tuan,

    either use below process as described by Phil, or use CLI to do the batch remove as shown here



    or using controller's GUI



    See also article on our GTAC Knowledge database

    Regards,
    Ondrej