ExtremeWireless (WiNG)

Expand all | Collapse all

RFS6000 SNMP OID for Area/Build does not work

  • 1.  RFS6000 SNMP OID for Area/Build does not work

    Posted 11-19-2018 17:35
    I downloaded WiNG-MIB and I was able to locate many OIDs I was looking for, but the OID "1.3.6.1.4.1.388.50.1.3.18.1.1.4" or "1.3.6.1.4.1.388.50.1.3.34.1.1.4" should display the Area / Build information of the controller or AP does not work. I already ran a full snmpwalk and could not find any other OIDs that display the information.

    The RFS6000 controller is running WiNG v5.4 with firmware 5.4.1.0-020R.


  • 2.  RE: RFS6000 SNMP OID for Area/Build does not work

    Posted 11-19-2018 17:46
    I would recommend that you upgrade to a later version of the code. 5.4.1.0-020R we are currently on 5.9.3. you will need a support contract to access this software code.


  • 3.  RE: RFS6000 SNMP OID for Area/Build does not work

    Posted 11-19-2018 17:46
    Thanks for the guidance.
    Could you tell me where I can get the firmware to download?


  • 4.  RE: RFS6000 SNMP OID for Area/Build does not work



  • 5.  RE: RFS6000 SNMP OID for Area/Build does not work

    Posted 11-19-2018 17:46
    5.9.1.(5) is the latest one for RFS6000