ExtremeWireless (WiNG)

Expand all | Collapse all

WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

  • 1.  WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

    Posted 11-02-2018 07:17
    Hello everyone,

    I recently purchase a VX9000 controller, 2 AP8432 access points and a VX9000 Appliance Licence.

    I configure some task on the controller :
    • Profiles (VX9000 & AP8432)
    • Auto-Provisionning (adopt any ap8432)
    • RF Domain (VX-Domain & User-Domain)
    When I switch on the AP8432 and I connect on to it with SSH, I write the following command :
    self
    controller ip X.X.X.X level 2
    commit write mem
    If I check the AP log, I get the following error :
    2018-10-29 11:16:57:Adoption state change: 'Waiting for cfgd OK' to 'Adoption failed': rejected due to adoption license

    Could someone help me to solve this problem because we cannot use the VX controller.

    Regards,


  • 2.  RE: WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

    Posted 11-02-2018 07:24
    Hi William,
    Did you activated your Appliance License and applied on your VX?

    If not you can refer to link below on how to activate your VX appliance license
    https://extreme-networks--c.na29.visual.force.com/apex/KCSInternal?srKp=ka1&id=kA134000000GwRx&a...

    And apply in your controller.




  • 3.  RE: WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

    Posted 11-02-2018 07:42
    Hi Wei,

    You were right, I haven't activate the Appliance Licence. Now it's working

    Thank's a lot.


  • 4.  RE: WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

    Posted 11-13-2018 18:28
    For layer-3 adoption, the correct CLI syntax is:

    controller host xxx.xxx.xxx.xxx level 2 [enter] (x represents controller IP for adoption)


  • 5.  RE: WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

    Posted 11-02-2018 07:42
    You're welcome.