ExtremeWireless (WiNG)

Expand all | Collapse all

How to block client use Wing 5.8

  • 1.  How to block client use Wing 5.8

    Posted 07-22-2017 00:56
    Hi Everybody

    I'm using AP7161 with FW WIng 5.8. How to block 1 client in the network?

    Thanks you





  • 2.  RE: How to block client use Wing 5.8

    Posted 07-22-2017 10:04
    Create an association ACL and apply to SSID...
    association-acl-policy CLIENT-BLACKLIST
    deny xx-xx-xx-xx-xx-xx xx-xx-xx-xx-xx-xx precedence 1
    permit 00-00-00-00-00-00 FF-FF-FF-FF-FF-FF precedence 1000



  • 3.  RE: How to block client use Wing 5.8

    Posted 07-24-2017 00:43
    Hi,

    You could configure MAC Firewall Rules to block the client.

    1. Select Configuration > Security > Wireless Firewall > MAC Firewall Rules
    2. Add new Row to create MAC firewall Rule to Deny the traffic



    3. Apply the rule on WLAN

    Best regards,


  • 4.  RE: How to block client use Wing 5.8

    Posted 07-24-2017 00:43
    Hi you,

    Thank for help, but is there a way to quickly copy the MAC address you want to block? The WING interface uses Adobe Flash so it can not be copied


  • 5.  RE: How to block client use Wing 5.8

    Posted 07-24-2017 00:43
    Use he CLI...



  • 6.  RE: How to block client use Wing 5.8

    Posted 07-24-2017 00:43
    Thanks Say Weir, but I'm pretty poor at using CLI, I often use more interfaces.



  • 7.  RE: How to block client use Wing 5.8

    Posted 07-24-2017 00:43
    In the GUI...
    Configuration Tab
    Wireless tab
    Association ACL - Create one to deny the MAC. Be sure to do a permit at the end for all others (permit 00-00-00-00-00-00 FF-FF-FF-FF-FF-FF precedence 1000)

    Once created...
    WLAN Tab
    select the SSID to apply ACL to
    Expand the list of options for the WLAN
    Select Firewall
    then look for association ACL and enter the name of the ACL you created above to deny the MAC. Apply and save.

    How to do via GUI.....
    I prefer to use the CLI as it is much quicker. Download the Command reference guide for WiNG. All CLI commands are there. Very easy to use.
    Good luck.


  • 8.  RE: How to block client use Wing 5.8

    Posted 07-24-2017 00:43
    Hi you

    I created MAC firewall rules but client still connection. I try created IP Firewall rules but still not successful. Can you help me
    Thank you

    I




  • 9.  RE: How to block client use Wing 5.8

    Posted 07-24-2017 00:43
    hey i need help... Please tell me how to disable client auto blocking in rfs7000 (WIPS ) ...