ExtremeWireless (WiNG)

Expand all | Collapse all

external antennas for wireless bridge

  • 1.  external antennas for wireless bridge

    Posted 07-23-2018 11:20
    Hi

    I need to make a wireless bridge between two buildings (150 meters), no cables.

    I have seen that with two simple AP7522 I could do it (I understand that using meshconnex configuration).

    Which antenna should I use for outdoor in this case?

    Thanks in advance.

    Regards.



  • 2.  RE: external antennas for wireless bridge

    Posted 07-23-2018 15:05
    Hello,
    Here is some considerations:
    1. MIMO is not working outdoor so you could expect 150Mbps rate maximum
    2. Check "show wireless regulatory device-type ap7522 " for DFS and maximum allowed power including antenna gain.

    I could recommend two patch/narrow pattern antennas and 1xALL antenna mode. I.e. AP will use always one (primary) antenna to send signal and both antennas for listening. Use this for link budget calculations.

    Misha