ExtremeWireless (WiNG)

Expand all | Collapse all

Does promiscuous mode on VM adapter needed for VX9000

  • 1.  Does promiscuous mode on VM adapter needed for VX9000

    Posted 09-25-2018 10:02
    HI there,
    We are migrating from RFS6000 to VX9000, an existing WLAN with APs 6521,7522 and 6562.
    For adoption all these APs , does promiscuous mode needed on VM adapter or not, and can you please advice for remote sites adoption over Layer 3 , the topology or ports that need to be configured.

    Thanks In advance,

    Theodore


  • 2.  RE: Does promiscuous mode on VM adapter needed for VX9000

    Posted 09-25-2018 10:08
    if you configure a single access interface (management) on the VX 9000 promiscuous mode is not needed.


  • 3.  RE: Does promiscuous mode on VM adapter needed for VX9000

    Posted 09-25-2018 10:10
    Thank you for the prompt response, but what if we have 2 VX9000 contollers in cluster mode?



  • 4.  RE: Does promiscuous mode on VM adapter needed for VX9000

    Posted 09-25-2018 10:45
    still not needed you will be clustering you should cluster at layer 3. and mint level 2 assuming you have a multi-site deployment

    eg if you have adopted aps using mint level 2 the cluster should also be at level 2

    We do not support mixed mint links on a controller

    set the cluster

    cluster name