ExtremeWireless (WiNG)

Expand all | Collapse all

Smart RF Power Calibration?

Richard Augusto

Richard Augusto10-22-2018 03:38

Richard Augusto

Richard Augusto10-22-2018 04:07

Richard Augusto

Richard Augusto10-22-2018 04:13

Richard Augusto

Richard Augusto10-22-2018 11:26

Robert Zarzycki

Robert Zarzycki10-22-2018 11:26

Richard Augusto

Richard Augusto10-22-2018 11:26

Robert Zarzycki

Robert Zarzycki10-22-2018 11:26

Richard Augusto

Richard Augusto10-22-2018 11:26

Robert Zarzycki

Robert Zarzycki10-22-2018 11:26

Richard Augusto

Richard Augusto10-22-2018 11:26

  • 1.  Smart RF Power Calibration?

    Posted 10-22-2018 01:55

    Hello,

    I would like to know why in some RF-Domains the APs adopted in that RF-Domain ignore the minimum and maximum power values.

    In an RF-Domain for example, I see that all Access Points are operating at full power. Is there a calibration process to be done?









  • 2.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 02:17
    Are you sure all the APs have the correct rf-domain policy with "SMART-MANAURA' policy applied to their profile?


  • 3.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 02:17
    Hi Robert,

    On Profile? Which option in the Profile must be checked for SMART RF to work?




  • 4.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 03:38
    Smart-RF is generating logs.




  • 5.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 04:07
    Help-me engineers






  • 6.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 04:07
    Can you show me output of CLI command 'sh run | in rf-domain' on ap that is showing radio in max power?



  • 7.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 04:07
    Good morning!

    AP-11-SALA-DE-DESCANSO#sh run | in rf-domain
    rf-domain-manager capable
    rf-domain RF-MANAUARA
    use rf-domain RF-MANAUARA



  • 8.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 04:07


  • 9.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 04:13
    On this site we use ap7522.


  • 10.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 11:26
    Hi Richard,

    Based on your initial screen shot smart-rf is not running.
    Note:
    All APs should not be on channels 1 & 36.
    If code is lower than 5.9.0 i would advise an upgrade to later code.
    If on 5.9.2 and above please un-check select shutdown



    Can you also re-enable neighbor recovery?

    If after 10-40 minutes of making the changes you are not seeing any changes please clear the smart-rf config.
    Operations-> smart-rf ->


  • 11.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 11:26


  • 12.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 11:26


  • 13.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 11:26


  • 14.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 11:26


  • 15.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 11:26


  • 16.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 11:26


  • 17.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 11:26


  • 18.  RE: Smart RF Power Calibration?

    Posted 10-22-2018 14:02
    Solved! I erased startup config. Smart RF works fine now!