ExtremeWireless (WiNG)

Expand all | Collapse all

AP's are not managing with virtual controller?

  • 1.  AP's are not managing with virtual controller?

    Posted 06-20-2018 05:17
    We have 3 No's of AP 7632 which is running the firmware version with 5.9.1.2-006R.
    But AP's are not managing with Virtual Controller and also I executed the cmd slave AP in CLI such as AP7632#controller adoption host [i].

    Kindly help us to resolve the issue.


  • 2.  RE: AP's are not managing with virtual controller?

    Posted 06-20-2018 10:14
    Make sure that the VX9000 is on same firmware version as APs or vice versa.

    Do you see them if you run CLI command 'show adoption status | i AP7632' ?


  • 3.  RE: AP's are not managing with virtual controller?

    Posted 06-20-2018 10:43
    • Are they in the same broadcast domain?
    • Can they see each other (run command: >show mint neighbors)?
    • Are they going through a routed switch?
    • The layer 3 command for adoption, if you need it, is:
    >en
    #self
    #controller host [i]
    #com wr
    #show context (for verification)
    • Are they all on the same firmware version?
    • Can they ping each other?


  • 4.  RE: AP's are not managing with virtual controller?

    Posted 06-20-2018 10:59
    One of the access points will act as a virtual controller, not VX9000.

    I have executed the all the cmd which you mentioned

    I can ping slave AP IP address from master AP

    All ap's are same firmware


  • 5.  RE: AP's are not managing with virtual controller?

    Posted 06-20-2018 11:12
    They can ping each other but can they see each other at Mint level.

    Run command: >show mint neighbors
    Are they able to see each other?

    On one of the APs check the mint Id (>show mint-id) then mint ping it from the VC:
    >en
    #mint ping


  • 6.  RE: AP's are not managing with virtual controller?

    Posted 06-20-2018 17:07
    Did you designate one of the Aps as virtual controller? What is the config of VC?