ExtremeWireless (WiNG)

Expand all | Collapse all

WING5 with Juniper switches

  • 1.  WING5 with Juniper switches

    Posted 11-01-2017 07:36
    Hello All,
    At last few years when i installing WING5 products with Juniper switches it seems layer2 MINT is blocked by switches withouts any log in the switch.
    So I set up a layer 3 adoption to workaround this issue, but it it seems we're running away from the problem and we need some recommendations in this case.
    I still want to use a default layer2 adoption method.
    How we can make it work with Juniper switches?

    Regards,

    Aviv



  • 2.  RE: WING5 with Juniper switches

    Posted 11-01-2017 07:39
    Hello Aviv,

    Per the release notes:

    When using Juniper ex2200-24p-4g or related models when connecting WiNG Access Points – either disable IGMP snooping on the Juniper switches to ensure AP adoption or configure firewall policy filter that will allow the flow of traffic to specified destination-mac-address –
    01:A0:F8:00:00:00/48.

    If you have any further question let us know! Have a nice day!


  • 3.  RE: WING5 with Juniper switches

    Posted 11-01-2017 07:44
    Simply change switches: Summit X440-24p does a great job..


  • 4.  RE: WING5 with Juniper switches

    Posted 10-12-2018 00:37
    I'm experiencing the same issue, thanks for the info.

    I will add that you can also manually configure mint-over-ip links between APs. I did this beacuse I didn't have control of the switches.

    I added the manual mint link commands for all APs in the ap profile so it got inherited by all.


  • 5.  RE: WING5 with Juniper switches

    Posted 11-01-2017 07:39
    Hello Daniel,

    Thanks a lot.