ExtremeWireless (WiNG)

Expand all | Collapse all

Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs.

  • 1.  Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs.

    Posted 08-21-2018 19:18
    WING Controller and APs


  • 2.  RE: Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs.

    Posted 08-21-2018 19:26
    Hello Erick,
    Can you tell me what screen on the VX UI you are referencing?


  • 3.  RE: Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs.

    Posted 08-21-2018 19:37


    Hope this is telling enough...WING 5.8, Operations TAB


  • 4.  RE: Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs.

    Posted 08-21-2018 19:37
    Hi Erick,

    taken from System Reference Guide (GUI - Operations - Smart RF)
    Smart Sensor defines whether a listed Access Point is smart sensor on behalf of the other Access Point radios comprising the RF Domain [/code] Then I assume this refers to Smart-RF operated state which is
    • normal - Radio broadcasts
    • offline - Radio does not broadcast (shut down or fulltime sensor)
    • sensor - Radio actively measures RF during calibration
    Regards,
    Ondrej


  • 5.  RE: Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs.

    Posted 10-30-2019 16:51

    Hi all ,  How to enable “Smart Sensor” on access point profile ?

    I trying to find this feature butt not found .