ExtremeWireless (WiNG)

Expand all | Collapse all

Fixed light on access point 7522

  • 1.  Fixed light on access point 7522

    Posted 09-25-2018 10:12
    Hello,I just install 1 access point 7522.This point of access goes back well on my controller vx9000 but the two leds remain fixed, and the access point does not diffuse the ssid as if the radio was deactivated.Could anyone help me?thank you in advance


  • 2.  RE: Fixed light on access point 7522

    Posted 09-25-2018 10:17
    Run the following command on the VX9000:
    #show adoption status
    Do you see the AP7522 and what message is noted down in the CFG-STAT column for same?


  • 3.  RE: Fixed light on access point 7522

    Posted 09-25-2018 10:34
    assuming the ap has been adopted

    and is running the correct code

    the next step is to check to see if the country codes has been entered in the RF-domain the ap is assigned


  • 4.  RE: Fixed light on access point 7522

    Posted 09-25-2018 13:28
    The country code is well informed in the RF-domain
    When I run the command, I see the controller but not the CFG-STAT column


  • 5.  RE: Fixed light on access point 7522

    Posted 09-25-2018 13:53
    From VX9000:

    vx9000-78D9AE#vx9000-78D9AE#show adoption status
    ---------------------------------------------------------------------------------------------------------------
    DEVICE-NAME VERSION CFG-STAT MSGS ADOPTED-BY LAST-ADOPTION UPTIME
    ---------------------------------------------------------------------------------------------------------------
    ----------------------------------------------------------------------------------------------------------------
    Total number of devices displayed: 0



  • 6.  RE: Fixed light on access point 7522

    Posted 09-25-2018 14:25


  • 7.  RE: Fixed light on access point 7522

    Posted 09-25-2018 13:53
    When I make this command I see my configured terminal[/code]


  • 8.  RE: Fixed light on access point 7522

    Posted 09-25-2018 14:25
    I followed the different steps and everything seems ok