ExtremeWireless (WiNG)

Expand all | Collapse all

Upgrade RFS6000 from wing 5.8 to 7.x

Jump to Best Answer
  • 1.  Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago
    Hello,

    Is it possible to upgrade from version 5.8 to 7.x?

    I have routers of the type:
    - AP621
    - AP650
    - AP6511
    - AP71XX
    - AP7532

    If upgrade is possible, are these routers supported by version 7.x?


  • 2.  RE: Upgrade RFS6000 from wing 5.8 to 7.x
    Best Answer

    Posted 6 days ago
    Hi Elias,
    - AP621 > No
    - AP650 > No
    - AP6511 > No
    - AP71XX > No
    - AP7532 > Yes, but better upgrade step by step, 5.8 >> 5.9 >> 7.4 >> 7.X.
    Also,  care the FW release date orders. E.g. 5.8.6.0-011R(14.09.2017) >> 5.9.3.3-004R(12.04.2019) >> 7.4.0.0-025R(11/07/2020) >> 7.X (xx.xx.2021)
    By the way, RFS6K does not support FW 7.X.


  • 3.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago
    Thanks for the answer @tknv

    There is no way to upgrade then. We bought this controller and the license some time ago and there is no way we can get rid of the routers that don't work with 7.x.

    The worst thing is to continue with a webGui via flashplayer.

    Does version 5.9 support a webgui with html5? ​


  • 4.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago
    Edited by DaveA 6 days ago
    @Elias Morais Pereira @Sam Pirok

    I'm sure there are very many sites with the same issue and unable to update...

    We really do need html5 support for WiNG 5.x and although it has been mentioned not in the foreseeable future, I don't think it has been ruled out.
    But unless we all request and support its development then that need wont be clear to Extreme.

    So, Extreme, can we have html5 GUI support added to WiNG5.x please..

    Edit: Although this thread is referring to RFS6000, I'm requesting this for VX9000 and other relevant 5.x controllers.

    ​​​​


  • 5.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago

    Hi

    Why do I get these updates?

    I have nothing to do with it

     

     

    regard

    Rolf Bjørnstadjordet

    Application Consultant

    Consafe Logistics

     

    www.consafelogistics.com

     






  • 6.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago
    WTF? What's the matter, colleagues? Why was I included in your communication?


  • 7.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago
    Me too i have received tons of e-mails the last two days..

    Please "unsubscribe" me the mail thread ��

    Have a nice day.

    /Martin
    Datcol





  • 8.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago

    Please unsubscribe me from any future emails.

     

    Regards

    Scott

     

     






  • 9.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago
    Hi @Scott Feda, at the bottom of any notification email you receive from the community there will be an unsubscribe option, if you click on that you can unsubscribe from any future emails. ​


  • 10.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago

    Please unsubscribe me too...


    Atenciosamente
    Marco A Furquim





  • 11.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago
    Hey Guys, 

    Please, stop flooding my topic.

    To unsubscribe, you MUST READ the WORDS at the bottom of any e-mail that you receive!!!


  • 12.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago
    I just wanted to follow up with you all really quick on your questions about why you are receiving so many emails from the community.

    We have moved to a new community platform, and to assist with the transition we moved your old subscriptions over. So if you were subscribed to a topic board in the old community, you are subscribed to the corresponding topic board with all the original content in the new community now.

    The problem comes from the different email settings in our new platform. You are likely currently set up to receive real time emails, meaning a new email for any new activity on the topic board. You can update this setting easily, this guide reviews the options for changing your email settings in the community.

    I'm very sorry for the frustration with the launch, I appreciate you all hanging in there with me while we work through the new platform growing pains. Please don't hesitate to reach out to me if I can help with anything at all, you can always reach me community@extremenetworks.com.


  • 13.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago
    Hi Extreme-Team,

    till last year I got a mail for every new topic in the wireless Wing community -> that was okay.
    Then I got NO mails anymore -> that was okay as well ;-)
    But now I (or better we all) get a mail for every reply on every post. -> Not okay :-(

    Pls stop this spamming .. 

    Thanx a lot

    Greets

    Sebastian


  • 14.  RE: Upgrade RFS6000 from wing 5.8 to 7.x

    Posted 6 days ago
    Not gonna lie, I find it pretty comical all these people trying to unsubscribe like they're an executive member trying to get off the ccall distribution. It's just surprising, given the topic, that this many people have not gone through the unsubscribe process before.

    Jonathan J. King
    Director of Information Technology | Cliff House Maine
    O: 207-361-6266 M: 207-337-5891