ExtremeWireless (WiNG)

Expand all | Collapse all

Is there a guide for configuring WiNG's onboard RADIUS server?

  • 1.  Is there a guide for configuring WiNG's onboard RADIUS server?

    Posted 10-10-2017 05:38
    Hi Do you have a guide to getting the onboard Radius server working in V5.8.5 when using DOT1X and MSCHAPV2, I have set this up and it all looks to be working but the radius times out, shows its running but I don't think it is ( this is on the RFS7000 using a mixture of 7131 and 7532 AP's ) Note: This conversation was created from a reply on: 2017-10-09: New GTAC Knowledge Articles October 01 - 07, 2017.


  • 2.  RE: Is there a guide for configuring WiNG's onboard RADIUS server?

    Posted 10-10-2017 20:29
    Hi Phil, the two links below will help on your question.
    How to configure 802.1x authentication with internal RADIUS on a WiNG controller -
    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-802-1x-authentication-wit...

    How to configure a WiNG controller for 802.1x authentication with internal RADIUS, using LDAP to connect to a Windows Active Directory server -
    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-a-Summit-WM3000-for-802-1...



  • 3.  RE: Is there a guide for configuring WiNG's onboard RADIUS server?

    Posted 10-13-2017 09:28
    If you use EAP-MSCHAPv2, use a certificate from your PKI, if you have a PKI. If not you need to distribute the self sign cert.

    Do not disable the certificate check at your clients!