ExtremeWireless (WiNG)

  • 1.  mesh shortcut. how to line up AP ?

    Posted 10-10-2018 20:55
    hi all,
    I have 3 AP, ap6562 running WING 5.9.2.3. AP1 is wired and VC, others are in mesh. all 3 are in line
    AP2 link to AP1
    AP3 link to AP2
    everything's fine, wifi is efficient. But sometimes something happen and then AP3 link to AP1, and then signal is bad quality, clients disconnect, throughput fall down dramatically.
    is there any way I can bind AP3 to AP2 definitively ?
    thank you for your tips and directions.


  • 2.  RE: mesh shortcut. how to line up AP ?

    Posted 10-11-2018 13:58
    Hi Dominix,

    You will need to configure a preferred neighbor.

    The below article will explain in a little more detail how to do it if you are unfamiliar.
    How to force WiNG MCX AP connect through Neighbor Mesh AP


  • 3.  RE: mesh shortcut. how to line up AP ?



  • 4.  RE: mesh shortcut. how to line up AP ?

    Posted 10-11-2018 13:58
    Thanks daren, but I can not access your link.
    does it look like the one of ronald ?



  • 5.  RE: mesh shortcut. how to line up AP ?

    Posted 10-11-2018 13:58
    Yes, it's the same.


  • 6.  RE: mesh shortcut. how to line up AP ?

    Posted 10-11-2018 13:58
    no, mine is working 🙂


  • 7.  RE: mesh shortcut. how to line up AP ?

    Posted 10-11-2018 13:58
    Of course,the first one isn't working just because it's linked from the other side. ;)


  • 8.  RE: mesh shortcut. how to line up AP ?

    Posted 10-12-2018 12:50
    Sorry about that i sent the wrong link.
    It is the same as the one Ronald sent.



  • 9.  RE: mesh shortcut. how to line up AP ?

    Posted 10-12-2018 16:58
    OK, it understand what it does, but when I apply this method, whether from the controler or directly on the AP, it just freeze the AP. unplug is needed. there might be a bug.