ExtremeWireless (WiNG)

Expand all | Collapse all

ap7532 factory default lost pasword

  • 1.  ap7532 factory default lost pasword

    Posted 07-07-2017 14:33
    How can i factory reset my AP 7532? i use putty with user reset pass FactoryDefault with no luck..i read about a toold named Discovery Tool that it supose can achieve this..where can i download it?


  • 2.  RE: ap7532 factory default lost pasword

    Posted 07-07-2017 14:36
    You need to be connected over serial console cable to reset with factory reset password.


  • 3.  RE: ap7532 factory default lost pasword

    Posted 07-07-2017 14:37
    Hi Fernando

    Are you attempting the factory default via SSH or via the Console? The "reset" "FactoryDefault" only works via the Console, and not via SSH.

    Here is a link to an article that explains the process.
    https://gtacknowledge.extremenetworks.com/articles/How_To/Unable-to-login-to-WM3700



  • 4.  RE: ap7532 factory default lost pasword

    Posted 07-07-2017 14:45
    I think the Discovery Tool was only for AP650. If you can login to the AP, you can also use "delete startup-config" and reboot the AP.


  • 5.  RE: ap7532 factory default lost pasword



  • 6.  RE: ap7532 factory default lost pasword

    Posted 07-07-2017 18:32
    Hi Fernando,

    You should be able to use the AP discovery tool to reset the AP7532. If you reset the AP with the discovery tool make sure the AP has been up an running less than 10 minutes (reboot if necessary), otherwise the discovery tool will not be able to communicate with the AP.



  • 7.  RE: ap7532 factory default lost pasword

    Posted 07-07-2017 18:32
    Ty.. Itried the Motorola Tool mentioned above but it didnt work..Is the same Discovery Tool from Extremenetworks? or is another one? If so,..where can i download it?


  • 8.  RE: ap7532 factory default lost pasword

    Posted 07-07-2017 18:32
    Can you clarify what you mean by "it didn't work"? Was the tool able to discover the AP? Yes, the older Motorola tool should work with the newer Extreme branded APs.


  • 9.  RE: ap7532 factory default lost pasword

    Posted 07-07-2017 18:32
    One more question..i have a Cisco Console cable..will work the same for this AP?


  • 10.  RE: ap7532 factory default lost pasword

    Posted 07-07-2017 18:32
    Yes the Cisco console cable should work.


  • 11.  RE: ap7532 factory default lost pasword

    Posted 07-07-2017 18:32
    Thanks Gavin..i ran the tool but it didnt discover any device however as you can see in the image the network scan detects them...



  • 12.  RE: ap7532 factory default lost pasword

    Posted 07-07-2017 18:32
    Well it is possible a personal firewall on the PC may be blocking the outgoing discovery. If you have the Cisco console cable handy, and the AP is not too far out of reach, I would probably go that route myself. It's usually pretty quick and easy.


  • 13.  RE: ap7532 factory default lost pasword

    Posted 07-07-2017 18:32
    Hi again..you were rigth..my Fortinet router was blocking the traffic..i setup a test environment and i could reach them
    Ty very much..