ExtremeWireless (WiNG)

Expand all | Collapse all

shut down the socket

  • 1.  shut down the socket

    Posted 04-02-2018 10:06
    Hello community,

    I have some strange logs :

    [AP1] %%%%>08:39:51.786: migration:mu migration: sender shut down the socket (migration.c:741)
    [AP2] %%%%>08:39:42.758: migration:mu migration: sender shut down the socket (migration.c:741)
    [AP3] %%%%>08:39:48.145: migration:mu migration: sender shut down the socket (migration.c:741)

    ect...

    when running:
    remote-debug wireless rf-domain default clients XX-XX-XX-XX-XX-XX duration 300 events all

    It's a normal behavior ?

    ap6532 wing 5.7.2

    Thanks,

    Aviv Kedem




  • 2.  RE: shut down the socket

    Posted 04-02-2018 12:28
    That behavior is normal, the device is Roaming and connected AP is sharing firewall session/mu cache with other APs.
    Since you are capturing debug logs from the RFD you will see theses sort of messages in working environment.

    Note:
    In regards to the firmware version.
    I highly recommend you upgrade to 5.8.5 or 5.9.1.4 depending on your controller/other ap hardware.


  • 3.  RE: shut down the socket

    Posted 04-07-2018 13:12
    Any suggestions?

    Thanks

    Aviv K


  • 4.  RE: shut down the socket

    Posted 04-12-2018 14:35
    Anybody?


  • 5.  RE: shut down the socket

    Posted 04-12-2018 15:13
    Hi Aviv,
    Based on your two threads here, it sounds like you should probably contact GTAC so someone can take a closer look at your network to see what's going on.


  • 6.  RE: shut down the socket

    Posted 04-02-2018 12:28
    Hello Daren,

    Does it mean the virtual controller always opens sockets for each client on all ap's on the rf domain/layer 1 mint OR just on the relevant ap's the client roams between them ?

    How can I specify the lifetime of the sockets ?
    There is some limitations about it?
    Can I check the amount of open sockets and the lifetimes?

    Thanks,

    Aviv Kedem