ExtremeWireless (WiNG)

 View Only
  • 1.  AP Adoption

    Posted 11-02-2018 07:30

    I have an RFS4010 with installed. It has 5 ports.

    Until today i had 6 x AP6522's. 5 of the 6 plugged into that and 1 into normal network switches. All are also on and they all work fine.

    I have recently purchased 4 x 7522's

    I have plugged them into the network and they are being picked up in the summary view, but they don't seem to be being adopted, nor the firmware being updated.

    I'm probably missing something really basic (i adopted this system when i took this role)

    Can anyone help please?

  • 2.  RE: AP Adoption

    Posted 11-02-2018 07:36
    Hi, Validate lincenses and firmware on RFS4000 and AP7522? Best Regards

  • 3.  RE: AP Adoption

    Posted 11-02-2018 07:50
    Ha, yeah, oops - out of licences :/

    I will buy more. Easy to install?

  • 4.  RE: AP Adoption

    Posted 11-02-2018 07:50

  • 5.  RE: AP Adoption

    Posted 11-02-2018 11:56
    Hello Kris,

    Once licenses installed make sure that the controller has the AP7522 image on it or the APs will not upgrade:

    #show device-upgrade versions
    rfs4000-1C4706 ap621 none
    rfs4000-1C4706 ap622
    rfs4000-1C4706 ap650 none
    rfs4000-1C4706 ap6511 none
    rfs4000-1C4706 ap6521 none
    rfs4000-1C4706 ap6522
    rfs4000-1C4706 ap6532 none
    rfs4000-1C4706 ap6562
    rfs4000-1C4706 ap71xx none
    rfs4000-1C4706 ap7502 none
    rfs4000-1C4706 ap7522 none
    rfs4000-1C4706 ap7532 none[/code]By default, the AP7522 image is not included in the main controller image.

    To upload image to controller please follow these steps: https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-upload-Wing-5x-AP-firmware-image-to-Wing-controller

    Thank you,


  • 6.  RE: AP Adoption

    Posted 11-02-2018 12:17
    Great - really helpful - thanks! 🙂

  • 7.  RE: AP Adoption

    Posted 11-17-2018 08:44

    Ive today upgraded my RFS4010 to 5.9.3 but the 7522's haven't upgraded from when i look at:

    #show device-upgrade versions

    The release notes for 5.9.3 say that the image IS included in the firmware?

    Is there a way i can upgrade the 7522 firmware from the image to the RFS automatically please - and subsequently the AP7522's?

    The 6522's i have are fine

  • 8.  RE: AP Adoption

    Posted 11-22-2018 05:54

    RFS4K doesn't have enough space to hold all type of APs FW. As far as I know, it doesn't include 7522 Firmware.
    To upgrade 7522 FW from RFS4K, you have to obtain AP7522 FW from WebPortal/TAC/partner, and upload to RFS4K.

    Use below CLI command to check which APs FW RFS4K have.
    #show device-upgrade versions
    Use below CLI command to upload FW to RFS4K.
    #device-upgrade load-image ap7522 tftp://xxx.xxx.xxx.xxx/path/file

    Or, you can check and upload from GUI