Wireless (General)

Expand all | Collapse all

Verifying NAC Appliance's RADIUS Configuration for each Switch

  • 1.  Verifying NAC Appliance's RADIUS Configuration for each Switch

    Posted 07-27-2018 08:08

    I've configured radius on the EAC and a switch in my lab.
    Also configured SNMP on both devices.

    Shared secret is the same. I dubble checked it.

    When I do in Java a verify of the radius configuration, I got the error:
    'unable to contcact the switch'

    What is going wrong?


  • 2.  RE: Verifying NAC Appliance's RADIUS Configuration for each Switch

    Posted 07-29-2018 15:04
    What is the switch type?

    As long as it's a supported switch NAC will configure your RADIUS settings for you. Depending on switch model NAC will either use a script, or SNMP sets to configure them.

    EoS has SNMP support for RADIUS configuration.

    XoS needs a CLI credential for script.

    Thanks
    -Ryan


  • 3.  RE: Verifying NAC Appliance's RADIUS Configuration for each Switch

    Posted 07-29-2018 15:04
    type switches: X440G2-24p-10G4 and X440G2-48p-10G4

    If XoS needs a CLI credential, is that the credential that is used when I do an 'open device terminal'?
    Because this works.