Wireless (General)

  • 1.  Altitude 350 Factory Reset

    Posted 11-02-2014 00:34
    I struggle to reset an Altitude 350-2e Access Point. I can connect by telnet but the login is always "incorrect" with the credentials I found in this thread: https://community.extremenetworks.com/extreme/topics/ap2605-factory-reset
    What is the problem, what am I doing wrong?



  • 2.  RE: Altitude 350 Factory Reset

    Posted 11-05-2014 14:39
    To reset the Altitude 350-2 AP to its factory default settings:

    1. Power off, and then switch on the Altitude AP. The Altitude AP reboots.
    2. Power off, and then switch on the Altitude AP during the vulnerable time interval.

    Video:
    https://enterasys.box.com/s/7rrmrueo3fyknxy33xyn



  • 3.  RE: Altitude 350 Factory Reset

    Posted 11-08-2014 00:51
    Unfortunately this didn't work for me. What worked for me was to get access to serial console on the device and boot it up with the startup script called "factory". That finally allowed me to login via telnet using the default password mentioned in the other thread.