Wireless (General)

  • 1.  How to configure the radius authentication(802.1x) in Nac appliance?

    Posted 05-08-2018 10:31
    Using internal DB How to configure the radius authentication in NAC Appliance?


  • 2.  RE: How to configure the radius authentication(802.1x) in Nac appliance?

    Posted 05-08-2018 10:34
    Hello,

    Configuration is done via NAC Manager or Extreme Management Center.
    What do you mean by internal db?

    Regards,

    Scott Keene
    NMS/NAC Support



  • 3.  RE: How to configure the radius authentication(802.1x) in Nac appliance?

    Posted 05-08-2018 10:34
    I mean to say how to configure the internal radius server in NAC


  • 4.  RE: How to configure the radius authentication(802.1x) in Nac appliance?

    Posted 05-08-2018 10:34
    If you are referring to terminating 802.1x lcoally at the NAC then you need to create an Advanced AAA Config and setup an LDAP Config as well, then tie the LDAP Config to a line in the AAA that is set with an Authentication Method of LDAP Authentication.

    Thee are some NAC Manager screen shots in this article:

    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-authorise-Windows-domain-user-compu...

    You can also use the NetSight Help.



    Regards,

    Scott Keene


  • 5.  RE: How to configure the radius authentication(802.1x) in Nac appliance?

    Posted 05-08-2018 10:34
    Try this URL to review the NetSight Help on this topic.
    *Be sure to change the IP in the URL to your NetSight server's IP:

    https://1.1.1.1:8443/Clients/help/content/nachelp/docs/nac_at_aaa_config.html

    Click on Advanced AAA Configuration when that page comes up.


  • 6.  RE: How to configure the radius authentication(802.1x) in Nac appliance?

    Posted 05-08-2018 10:35
    you need to change basic AAA config to Advanced = https://emc.extremenetworks.com/content/oneview/docs/control/access_control/docs/l_ov_ia_at_aaa_conf...

    Then it is easy.

    Good luck