Wireless (General)

Expand all | Collapse all

Assigning static IPs to Access points

  • 1.  Assigning static IPs to Access points

    Posted 12-11-2014 10:05
    Hi,

    Can we assign static IP to APs throught its CLI? What is the default username/password for AP? User guide/Maint guide instructs to assign static IP only after AP connects to controller. But we need to assign IP address and controller address manually to AP to make it adopt to controller. Running own DHCP server or specifying options in existing DHCP server are not possible.

    Regards
    Karthik.


  • 2.  RE: Assigning static IPs to Access points

    Posted 12-11-2014 10:15
    If it WM 3700/3600/3400 username and password for AP is same as controller.
    From CLI of controller use
    Connect


  • 3.  RE: Assigning static IPs to Access points

    Posted 12-11-2014 15:30
    If you are working with the IdentFi Wireless Access Points:

    Default Log in: admin/new2day

    cset ipaddr [i]
    cset ipmask <255.255.255.255>
    cset gateway [i]
    cset authIpAddr 1 [i]
    cset dhcp disable
    capply
    csave
    (Wait until the prompt comes back)
    reboot

    Example:
    cset ipaddr 10.1.1.1
    cset ipmask 255.255.0.0
    cset gateway 10.1.254.254
    cset authipaddr 1 10.1.1.2
    cset dhcp disable
    capply
    csave
    (Wait until the prompt comes back)
    reboot



  • 4.  RE: Assigning static IPs to Access points

    Posted 12-12-2014 10:58
    Hi Doug,

    Yes. Its IdentiFi portfolio. Thanks for the help.


  • 5.  RE: Assigning static IPs to Access points

    Posted 02-09-2017 04:50
    Can anybody tell me the command for how to change/add tagging in AP.


  • 6.  RE: Assigning static IPs to Access points

    Posted 02-09-2017 10:39
    I think that is the correct command....

    # cset vlanVidWassp


  • 7.  RE: Assigning static IPs to Access points

    Posted 03-22-2018 22:24
    What is the command to view the config?


  • 8.  RE: Assigning static IPs to Access points

    Posted 03-22-2018 22:24
    cget config globalOnly