Scripting

  • 1.  UPM triggers

    Posted 01-07-2014 21:50
    Create Date: Aug 2 2012 3:35PM

    From the concepts guide:
    [quote]Dynamic Profiles
    Dynamic profiles are so named because they are dynamically triggered by the following types of events:
    Device discovery and disconnect
    User or standards-based authentication and logoff
    Time of day
    Switch events reported by the Event Management System (EMS)


    my question is the Last ITEM in the list
    how would one go about using an EMS message to trigger a script?
    I cant see where I can configure UPM to do this... and the concepts guide is a little vauge in this one topic.

    thanks for any help
    Dave

    [/quote]
    my question is the Last ITEM in the listhow would one go about using an EMS message to trigger a script?I cant see where I can configure UPM to do this... and the concepts guide is a little vauge in this one topic.thanks for any helpDave (from Dave_Rahn)


  • 2.  RE: UPM triggers

    Posted 01-07-2014 21:50
    Create Date: Aug 3 2012 6:04AM

    1) Create the upm profile script

    create upm profile disable_port_elrp
    disable port $EVENT.LOG_PARAM_7

    2) create a log target to trigger the upm profile in the event there is match condition

    create log filter f1
    configure log filter f1 add event ELRP.Report.Message match string "LOOP"
    create log target upm disable_port_elrp
    enable log target upm disable_port_elrp
    configure log target upm disable_port_elrp filter f1 severity Info
    configure log target upm disable_port_elrp match Any (from john_padilla)


  • 3.  RE: UPM triggers

    Posted 01-07-2014 21:50
    Create Date: Aug 3 2012 7:17AM

    hey thanks JP
    I went back and reread that too... thinking "there has to be an example"

    (from Dave_Rahn)