Network Architecture & Design

Expand all | Collapse all

Proper way to link switches X440

  • 1.  Proper way to link switches X440

    Posted 04-26-2017 23:50
    I am new to Extreme switches and I have a lab setup. I am using X440-24ps. How do I connect

    Switch 1 SFP1 to Switch 2 SFP 1
    Switch 1 SFP2 to Switch 3 SFP 1
    Switch 1 SFP3 to Switch 4 SFP 1
    Switch 1 SFP4 to Switch 4 SFP 1

    Switch 1 SFP 1 thru 4 are ports 21-24 respectively
    Switch 2 SFP 1 are port 24

    Physically connecting seems to create issues of lost connectivity so I think I am missing something in the configuration portion.


  • 2.  RE: Proper way to link switches X440

    Posted 04-27-2017 01:31
    No specific configuration required.

    1. Could you please let me know what type of SFP's are used on all these switches?
    2. What is the switch model and EXOS version running?
    3. Collect the output for "debug hal show optic-info"?
    4. What is the port and LED status on all switches?

    For e.g: On Switch-1 use the command "show ports 21-24 no-refresh" and "show ports 21-24 configuration no-refresh" to check the status of port, etc..



  • 3.  RE: Proper way to link switches X440

    Posted 04-27-2017 01:33
    Example output from Lab:
    ----------------------------------

    X440-24p.3 # debug hal show optic-info
    Port 21
    SFP or SFP+: SFP
    Signal: present
    TX Fault: no
    SFP/SFP+ Vendor: FINISAR CORP.
    SFP/SFP+ Part Number: FTLF6529P2BCL-EX
    SFP/SFP+ Serial Number: PGK3F19
    SFP/SFP+ Manufacture Date: 091107
    SFP/SFP+ Type: SFP/SFP+
    Connector: LC
    GE Compliance: 1000BASE-SX
    Wavelength: 850



  • 4.  RE: Proper way to link switches X440

    Posted 04-27-2017 02:41
    Based on the description you have 2 links going from Switch 1 to switch 4. You need to ceeate link aggregation or block one of those links to not create loop.


  • 5.  RE: Proper way to link switches X440

    Posted 05-01-2017 17:43
    Sorry,

    "Switch 1 SFP4 to Switch 4 SFP 1" should read "Switch 1 SFP4 to Switch 5 SFP 1"

    Should this config work straight out of the box? Anything I need to add or recommendations?

    Also, does anyone know if there is a model of SFP that is Multi Mode Bi-Directional? I would like to free up strands. I know it is available in Single Mode but was hoping for MM.

    Thank You.


  • 6.  RE: Proper way to link switches X440

    Posted 05-02-2017 16:15
    Hello Peter,

    Yes, that should work straight out of the box. Can you elaborate on lose connectivity? Are you losing connectivity to the switches or are end users having issues?