Network Architecture & Design

  • 1.  802.1x Authentication Problem

    Posted 08-23-2016 09:30
    Hi,I have Enterasys B5 Switch. My switch configures 802.1x authentication as Extreme Networks video(https://www.youtube.com/watch?v=V8lMAMqLYmk)
    I connect my computer on switch port. My computer has an access to network without authentication. UPlink port is on the ge.1.24.
    What is the mistake here?

    Enterasys B5G124-24
    Firmware 06.81.02.0007

    Find the configuration file here.


  • 2.  RE: 802.1x Authentication Problem

    Posted 08-23-2016 11:19
    Remove the command lines "set eapol auth-mode forced-auth ge.x.x" and "multiauth port mode force-auth" from the access-ports and leave it only on the uplink port. Change "auth-mode" to "auth-reqd and try again.


  • 3.  RE: 802.1x Authentication Problem

    Posted 08-23-2016 16:34
    Hi.

    Enable radius "set radius enable".

    My configuration is and working:

    set dot1x enableset eapol enable
    set eapol auth-mode forced-auth ge.1.48 [u]

    set policy maptable response both

    set vlanauthorization enable

    set radius enableset radius server 1