Network Architecture & Design

  • 1.  Can i use Extreme SFP transceiver for switch Cisco 3850 and Cisco 6807 XL???

    Posted 09-23-2015 00:50
    Our customer have two switchs Cisco 3850 and Cisco 6807 XL, they are using there modules:
    - 1000BASE-SX SFP transceiver module MMF 850nm DOM
    - 1000BASE-T SFP
    - 10GBASE-SR SFP Module

    They want to buy new Extreme SFP as below to replace:

    - 1000BASE-SX SFP 10 Pack, Industrial Temp
    MMF 220 & 550 meters, LC connector
    - 10/100/1000BASE-T SFP module, CAT5 cable 100m link, RJ45-connector for Giga Bit Ethernet SFP Port, Industrial Temp
    - 10 Gigabit Ethernet SFP+ module, 850nm, MMF 26-300m link, LC connector

    is it OK ? can we use Extreme transceiver for Cisco switch ?



  • 2.  RE: Can i use Extreme SFP transceiver for switch Cisco 3850 and Cisco 6807 XL???

    Posted 09-23-2015 01:11
    No. Not recommended. This is not Cisco forum. For lab environment its possible.
    http://www.firewall.cx/cisco-technical-knowledgebase/cisco-switches/866-cisco-switches-3rd-party-sfp...

    Cisco will err-disable your port. They have EEPROM.
    Ask your customer to buy Cisco SFP, if not they will not support it.



  • 3.  RE: Can i use Extreme SFP transceiver for switch Cisco 3850 and Cisco 6807 XL???

    Posted 09-23-2015 01:26
    Thanks Wong Peng Leong for your answer !


  • 4.  RE: Can i use Extreme SFP transceiver for switch Cisco 3850 and Cisco 6807 XL???

    Posted 09-26-2018 14:59
    Can i use a transceiver SFP+ 1310nm 10Gb/s -8.2~0.5dBm -12.6dBm LC SM 10km Cisco for Extreme Siwtch, is this compatible?...Thanks for your help



  • 5.  RE: Can i use Extreme SFP transceiver for switch Cisco 3850 and Cisco 6807 XL???

    Posted 09-26-2018 14:59