Network Architecture & Design

  • 1.  Enterasys commands to Extreme equivalent commands

    Posted 06-09-2016 08:45
    Hello,

    So we are now starting to put in more and more Extreme switches into clients buildings. But I have use Enterasys before that. My self I am still not getting use to all the different commands and hopping there is a equivalent command to some of my needs to troubleshoot for clients.

    Looking for these same commands below from Enterasys, but to have the equivalent command for Extreme Switches.

    The Sow commands:

    show port alias
    show ports status
    show vlan portinfo
    show mac port ge.x.x
    show port inlinepower

    Some of the set commands:

    set port alias
    set vlan egress XXX ge.x.x tagged
    set port inlinepower ge.x.x admin off [auto]

    Some commands to clear:
    clear port vlan ge.x.x
    clear vlan egress XXX ge.x.x

    I appreciate the help.
    Regards,
    Ian
    [/code]



  • 2.  RE: Enterasys commands to Extreme equivalent commands

    Posted 06-09-2016 08:50
    1 don't know (further DN)
    2 show ports
    3 show vlan tag n (or show ports n to display how much vlans are there on port)
    4 sh fdb port n
    5 DN

    6 conf ports
    7 conf vlan XXX add ports n tag
    8 DN


  • 3.  RE: Enterasys commands to Extreme equivalent commands

    Posted 06-09-2016 09:27
    Hi Ian,

    equivalent commands are as follows:
      show ports description show ports no-refresh show ports information detail | include "(^Port|(Internal|802.1Q) Tag)" show fdb port NUMBER show inline-power info ports PORTLIST configure ports NUMBER description-string configure vlan NAME/TAG add ports PORTLIST tagged disable inline-power ports PORTLIST configure vlan NAME/TAG delete ports PORTLIST
    1. [same as above]
    You can usually use a list of ports or a single port, similar to EOS port strings.

    For "show vlan portinfo" see as https://github.com/extremenetworks/ExtremeScripting/tree/master/EXOS/Python/show_port_vid well. Related HUB thread: https://community.extremenetworks.com/extreme/topics/xos_show_vlan_portinfo

    You can use E2X for help in transitioning from EOS to EXOS. See the GTAC Knowledge article "How to Convert EOS Configurations to EXOS using e2x.py."

    HTH
    Erik


  • 4.  RE: Enterasys commands to Extreme equivalent commands

    Posted 06-09-2016 09:27
    Thanks for answering this one, Erik. Happy to see the extra references to Github and GTAC Knowledge.


  • 5.  RE: Enterasys commands to Extreme equivalent commands

    Posted 06-09-2016 09:27
    Thank you Nick and Erik,

    This will help me out a lot, as I am still trying to get used to using extreme switches.

    Very useful information.

    Ian


  • 6.  RE: Enterasys commands to Extreme equivalent commands

    Posted 07-01-2016 12:18
    Hi Ian,

    I have added the commands you asked for, but that were missing from E2X, to the interactive mode of E2X in version 1.0.2. The interactive mode (e2x.py --interactive) is kind of an interactive dictionary between EOS and EXOS.

    Best regards,
    Erik