Network Architecture & Design

Expand all | Collapse all

Could we create Stacking over two switches?

  • 1.  Could we create Stacking over two switches?

    Posted 02-24-2018 18:37
    Could we create Stacking over two switches?


  • 2.  RE: Could we create Stacking over two switches?

    Posted 02-24-2018 20:02
    Hello Alok,

    which switches you are talking about?

    The Summit switches (e. q. x440 and x620) are stackabel.

    Best regards
    Stephan Harrer



  • 3.  RE: Could we create Stacking over two switches?

    Posted 02-25-2018 05:05
    X440-G2 Switches


  • 4.  RE: Could we create Stacking over two switches?

    Posted 02-25-2018 12:52
    There is an EXOS stacking tool, lots of detail information there, you can try below link.

    https://stackingtool.extremenetworks.com/StackingTool/?_ga=2.186435425.938358096.1519566010-19917194...


  • 5.  RE: Could we create Stacking over two switches?

    Posted 02-25-2018 14:17
    All EXOS switches (but x430) are stackable.


  • 6.  RE: Could we create Stacking over two switches?

    Posted 02-26-2018 04:53
    HI,

    The following article could guide you.

    Getting started with Summit Stacking
    https://gtacknowledge.extremenetworks.com/articles/How_To/Getting-started-with-Summit-Stacking

    Best regards,
    Bin


  • 7.  RE: Could we create Stacking over two switches?

    Posted 02-26-2018 12:20
    Hi, Alok. If you're wondering whether you can stack different-model switches together, the answer is yes. The following tables will tell you which switch models can be stacked with each other, and the stacking methods to use in each case.

    For switches that run EXOS version 16, use this table.

    For switches that run EXOS version 21 & 22, use this table.

    Larry Kunz
    Extreme Networks
    Information Development


  • 8.  RE: Could we create Stacking over two switches?

    Posted 02-24-2018 20:02
    X440-G2