FAQs

  • 1.  show logging buffer

    Posted 04-17-2014 03:28
    S4 don't display any logs on show logging buffer with "Show Logging Buffer failed, only one instance allowed" message on show support.

    Could you please verify if this symptom is hardware failure?



  • 2.  RE: show logging buffer

    Posted 04-17-2014 05:32
    Could you please post message and show config logging so we can review Other than that I would open a case with GTAC so we can get to the root cause of the message Thanks Jason


  • 3.  RE: show logging buffer

    Posted 04-17-2014 05:50
    OK, Where can I upload "show support" file on this reply?[/code]


  • 4.  RE: show logging buffer

    Posted 04-17-2014 06:05
    I am not sure you wNt to advertise all of your information to the world If you want to send it to jparker@extremenetworks.com I can look at it when I get to work


  • 5.  RE: show logging buffer

    Posted 04-17-2014 06:06
    We may need to create a case if this is an issue so we end up helping everyone


  • 6.  RE: show logging buffer

    Posted 04-17-2014 06:08
    OK, Thanks,


  • 7.  RE: show logging buffer