FAQs

 View Only

C2RPS-SYS Redundant Power Supply status is not Viewable in MIBs

  • 1.  C2RPS-SYS Redundant Power Supply status is not Viewable in MIBs

    Posted 12-03-2013 13:09
    Article ID: 7649

    Products
    SecureStack C3, firmware 1.02.06.0004 and lower
    SecureStack C2, firmware 5.02.06.0004 and lower
    SecureStack B3, firmware 1.02.06.0004 and lower
    SecureStack B2, firmware 4.02.06.0004 and lower
    SecureStack A2, all firmware
    C2RPS-SYS, C2RPS-CHAS8, C2RPS-PSM

    Symptoms
    C2RPS-SYS redundant power supply status is not viewable in MIBs

    Solution
    For the C3, upgrade to firmware 6.03.00.0022 or higher.
    For the C2, upgrade to firmware 5.02.07.0006 or higher.
    For the B3, upgrade to firmware 6.03.00.0022 or higher.
    For the B2, upgrade to firmware 4.02.07.0006 or higher.
    For the A2, no change is expected.

    Release notes state:
    code:
    Power Supply & Fan Monitoring via SNMP enables visibility to potential hardware issues that could affect network availability. The early view enables administrators to proactively address hardware issues and ensure business continuity.


    The MIB information retrieved per 12456 and identified as power supply instance 2 represents the RPS external power supply (5741) for the stack unit in question.

    Pre-upgrade workarounds:
    1. Issue the '[code]show system[/code]' command, using 5741 as a guide to the various values of the [code]PS2-Status[/code] field and their interpretations.
    2. Enable syslogging, which includes power status change messages (7130).
    3. Enable traps, which with later firmware includes [code]etsysPsePowerNotification[/code] traps (7130).