FAQs

Installation Manual for I-Series Power Supplies

  • 1.  Installation Manual for I-Series Power Supplies

    Posted 12-03-2013 14:22
    Article ID: 10166

    Products
    I3H252
    I3H-PWR

    Solution
    Manuals for the Enterasys I-Series Industrial Ethernet Switch include material specific to each of the I-Series components except the I3H-PWR power supply modules.

    There are instructions for connecting the power supply to the switch, in the Hardware Installation Guide. This includes the following two items: Features

    * DC Power

    The I-Series switch requires 24 VDC input and can support a
    redundant power source. For power supply specifications, refer to
    "Power Requirements" on page A-3. Power supplies are not provided.
    However, an AC to DC converter power supply, part number I3H-PWR,
    is available to be purchased from Enterasys.[/code] Power Requirements

    The power requirements for the I-Series switch are as follows:

    Table A-8 Power Requirements
    Electrical Specification
    Input Power 24 VDC ~ 3.2 A
    Power Consumption 18 to 36 Volt DC
    0.93 to 1.87 A
    33.48 to 33.66 W[/code]
    Also, see the I-Series product page plus more literature for the I3H-PWR (Astec ADN2.5-24-1PM) 60 Watt Power Supply.