General Discussion

 View Only
  Thread closed by the administrator, not accepting new replies.

  • 1.  We're here to help!

    Posted 11-02-2020 16:05
    No replies, thread closed.

    The Extreme Community Team is here to help you find the resources you need, when you need them. If your search on the community has not been helpful, please don't hesitate to reach out to us so we can help you find what you need. 

     

    Ways to contact the Extreme Community Team
    Email: Community@extremenetworks.com

    Or

    Mention Sam Pirok in your post by typing out "@Sam Pirok"
     



  • 2.  RE: We're here to help!

    Posted 11-06-2020 19:26
    No replies, thread closed.

    Question aboute AP 3915i, "@Sam Pirok" . is it possible to change the ap´s firmware version from FCC to ROW’ in order to sign in the FCC 3915 AP in a controller with WS-REG10P-ROW?

    best regards



  • 3.  RE: We're here to help!

    Posted 11-06-2020 20:32
    No replies, thread closed.

    Hi Cesar-Augusto, I’m going to look in to this for you but you might also want to post this question on the Products> ExtremeWireless (IdentiFi) topic board to bring this to the attention of all our IdentiFi experts, they might be able to help you out as well. 

     

    Here is a link to that board: https://community.extremenetworks.com/extremewireless-identifi-230294



  • 4.  RE: We're here to help!

    Posted 11-06-2020 20:38
    No replies, thread closed.

    Hi again Cesar-Augusto, I ran this past some of our IdentiFi engineers and it looks like FCC and ROW APs are separate products, so there isn’t a way to convert one in to the other. Sorry I don’t have better news on this question.



  • 5.  RE: We're here to help!

    Posted 11-07-2020 00:23
    No replies, thread closed.

    @Sam Pirok thank you

    best regards