Documentation

Expand all | Collapse all

AP 230 lights

  • 1.  AP 230 lights

    Posted 10 days ago
    I did a reset on all 6 AP230 boxes. 4 turned white then dark for the 4 second pulse every minute. 2 LED lights stayed white. Is that an error or issue?


  • 2.  RE: AP 230 lights

    Posted 10 days ago
    Edited by StephanH 10 days ago
    Hello Tom,

    the APs are cloud APs, so first the question, do you have a cloud account and set up the APs there accordingly?
    Only then can the APs work. You should do that first.

    Here is a link that describes the LEDs. But as written, first connect to the cloud and then check the status of the LEDs.

    Q A: Former Aerohive AP LED indicator patterns explained | Extreme Portal
    Force remove preview
    Q A: Former Aerohive AP LED indicator patterns explained | Extreme Portal
    1. AP110 and AP120 Dark: There is no power or the status indicator is disabled. Blue (steady): The device is booting up or there is no backhaul link; (flashing) the device is shutting down. Green: The default route is through the backhaul Ethernet interface, but not all conditions for normal operations (white) have been met.
    View this on Force >