Training (Extreme Dojo)

  • 1.  SecureCRT to far switch?

    Posted 04-11-2016 05:47
    when I made connect by serial cable with extreme switch vlan BH100.10.10.50 and i have ping with switch Vlan BH ip 100.10.10.51, my question , How can I login to the remote to far switch?


  • 2.  RE: SecureCRT to far switch?

    Posted 04-11-2016 07:40
    Hi,

    from the CLI you can do a telnet to a remote switch. Be sure to specify the correct VR to use to reach that remote switch (for example: telnet 100.10.10.51 vr vr-default).


  • 3.  RE: SecureCRT to far switch?

    Posted 04-11-2016 07:40
    Switch# telnet 100.10.10.51 vr vr-default Just this command set up on switch far?


  • 4.  RE: SecureCRT to far switch?

    Posted 04-11-2016 07:40
    telnet vr "VR-Default" 100.10.10.51

    That is a XOS switch - correct ?


  • 5.  RE: SecureCRT to far switch?

    Posted 04-11-2016 07:40
    Yes. It is the far switch


  • 6.  RE: SecureCRT to far switch?

    Posted 04-11-2016 07:52
    or ssh to the other switch i.e. 10.12.0.1 with username admin

    X430-48t.4 # ssh vr "VR-Default" admin@10.12.0.1



  • 7.  RE: SecureCRT to far switch?

    Posted 04-11-2016 10:36
    Thank for your replay. Just another quistion, i have 22 switches in my network type summite 450x24 dc. Should be set up this command on all switches? Then i will not loos the access remotly from my office?


  • 8.  RE: SecureCRT to far switch?

    Posted 04-12-2016 00:17

    Hello Munir,

    Use the command examples (telnet or ssh) on the console of 100.10.10.50 to remotely manage the far switch 100.10.10.51. as you require access.
    Think "remote-SecureCRT". You're going to like it.

    A couple of caveats:
    Assumes telnet has not been disabled
    or
    Assumes SSH is installed and enabled. SSH (secure shell) is encrypted, more secure, generally preferred.

    .