Aerohive Migrated Content

Expand all | Collapse all

BLE information output

  • 1.  BLE information output

    This message was posted by a user wishing to remain anonymous
    Posted 10-24-2018 13:10

    Hi,

    first of all, sorry for my bad english 🙂,

     

    I've enabled "iBeacon Services" & "ibeacon Monitoring" under a network policy.

     

    I see my beacon device under Monitor->Proximity & via ssh with this command:

     

    Test-BL3#sh int ble0 ibeacon-monitor list 

      Sender    RSSI         UUID         Major Minor Measured Power Last Update Time

    ------------ -------- --------------------------------  ----- ----- -------------- --------------------

    d0669e491274  -65 dBm f7826da64fa24e988024bc5b71e0893a  44600  21826    -59   2018-10-24 15:02:06

    5c5b352e7eb1  -93 dBm 307d172ff172499badc26f50fd22c807    5  65535     0   2018-10-24 15:02:06

    5c5b352e6fac  -77 dBm 307d172ff172499badc26f50fd22c802    5  65535    -60   2018-10-24 15:02:06

    5c5b352e7ea2  -59 dBm 307d172ff172499badc26f50fd22c837    5  15312    -60   2018-10-24 15:02:06

    Item Count: 4

    Test-BL3#

     

     

    Is it possible to have a log about the "connection" and "disconnection" of the ble-device in real time ?

     

    Thanks in advance

    Regards

    Federico

     



  • 2.  RE: BLE information output

    Posted 10-24-2018 20:51

    That information should populate in the buffered log, which does overwrite itself after a certain amount of data, so you'd want to set up a syslog server to gather this information long term.



  • 3.  RE: BLE information output

    This message was posted by a user wishing to remain anonymous
    Posted 10-25-2018 10:07

    Hi Sam,

    thanks for your answer.

     

    Do you know how to extrapolate this type of data from the buffered log ?

     

    Via CLI, if I do "sh logging buffered" I see nothing that can concern ble information.

    Thanks for the help

     

    Federico

     



  • 4.  RE: BLE information output

    This message was posted by a user wishing to remain anonymous
    Posted 10-25-2018 10:53

    Hi Sam,

     

    sorry, maybe i found the way..

     

    I enabled the debug of ibeacon...

     

    Thanks again

     

    Ciao

    Federico