I have few questions regarding hivemanager dashboard.
To answer your questions:
Thank you for reply Sam,
Can you explain it following ?
The first picture, first chart shows that you are well within the normal range of bandwidth usage for an enterprise networking using 1 to 10 APs. The second chart shows that you are also well within the normal range of unique client devices on your network when compared to a similar sized network. The last chart in that top picture shows that you have more than the average clients with poor health scores for a network of your size.
The second picture looks like the HiveManager isn't reporting everything it should, I'd be interested to see if you have any failing .lpr files in your APs buffered logs. The .lpr files are the files used to send information from the AP to the HiveManager to form these kinds of reports. If those files are failing to get through for some reason, you will see the HiveManager show blank reports such as the one you've shown here.
Thank you Sam
Hi @Sam Pirok,
Can't we disable the Presence Analytics ?
Yes, if you go to Configure> Open the network policy we had presence analytics running on> Go to Additional Settings> Network Services (left hand side menu header)> Location Server> and toggle this to "Off", then presence analytics will be disabled. If any network policy is trying to use Presence analytics, it will need to have location server turned on.
thank you @Sam Pirok
Contact Us:Sam PirokCommunity@extremenetworks.com