End of Service Products

 View Only
  • 1.  How to set Ridgeline temperature threshold

    Posted 04-27-2015 05:13
    Hi,
    we're receiving Overheat messages at 34 degrees from Ridgeline and want to set the threshold for these messages to 38 degrees. How can we do this?:

    Alarm Message: Core/Stack SNMP Trap Overheat
    sysDescr.0: ExtremeXOS (Stack) version 15.3.3.5 v1533b5-patch1-10 by release-manager on Fri May 23 15:29:58 EDT 2014
    extremeCurrentTemperature.0: 34


  • 2.  RE: How to set Ridgeline temperature threshold

    Posted 04-28-2015 15:25
    Roxelchen,

    Which version of Ridgeline is in use?


  • 3.  RE: How to set Ridgeline temperature threshold

    Posted 04-28-2015 18:21
    Roxelchen,

    This is not possible in Ridgeline 4.0 but can be done in 3.1. See the link below, starting on page 328 is the information for configuring thresholds:

    http://extrcdn.extremenetworks.com/wp-content/uploads/2014/02/Ridgeline3.1_SP3_ReferenceGuide.pdf



  • 4.  RE: How to set Ridgeline temperature threshold

    Posted 04-30-2015 04:49
    Thanks, i already tried this option but was unable to archive my goal.
    Could you help me with the exact settings for Overheat to set them to 39 degrees ?